Home :: IMU SENSORI :: IMU Micro SENSOR :: C - Series Micro Sensor :: I3500 INTEGRATED NAVIGATION AND GNSS PRODUCT COMMAND AND PROGRAMMING INSTRUCTION

Versione stampabile

I3500 INTEGRATED NAVIGATION AND GNSS PRODUCT COMMAND AND PROGRAMMING INSTRUCTION

← Precedente prodotto

I 3500 ( FULL TECHNICAL DATA SHEET ON DEMAND )

Configuration Command Overview

Command	description
REBOOT	Reset
LOG	Request message output from the device
CONFIG	Configure module
UNLOGALL	Cancel all message outputs
SAVECONFIG	Save configuration to Flash
SETBASELINE	Set dual antenna baseline constraint length or inclination, pole wall compensation and other parameters, save and restart to take effect.
SERIALCONFIG	Set serial port baud rate

1.2 Command Detail：

1.2.1 REBOOT

Reset and restart, effective immediately. Equivalent to power on again.

1.2.2 LOG

1.2.2.1 ENABLE/DISABLE: Globally turn on/off data output

LOG ENABLE Globally enable data frame output (default)

LOG DISABLE Globally disable data frame output

1.2.2.2 VERSION: Display module version information

LOG VERSION Print firmware version information

1.2.2.3 COMCONFIG: Display serial port configuration information

LOG COMCONFIG Print serial port and output protocol configuration information

1.2.2.4 INSCONFIG: Display integrated navigation configuration information

LOG INSCONFIG Displays integrated navigation configuration information, including the current kinematic model, dual antenna parameters, and NMEA TID.

Codice SKU17915

Distributor Digital Condal Sistemas

Il nostro prezzo:

Quantità

Fai una domanda a proposito di questo prodotto

Spedisci ad un amico

Il tuo nome:	*
La tua e-mail:	*
Email destinatario:	*
Aggiungi un messaggio personale
Immagine di verifica
Inserisci il codice di sicurezza come mostrato nella figura:
	*	The code is case-sensitive and must be entered exactly as above.